Watchguard Firebox X5-W Guía de usuario Pagina 74

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 234
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 73
Changing Your Network Settings
58 Firebox X Edge e-Series
2 From the navigation bar, select Network > Routes.
The Routes page appears.
3 Click Add.
The Add Route page appears.
4 From the Type drop-down list, select Host or Network.
This box tells if the destination for the static route is one computer or a network of computers.
Note
A host is one computer. A network is more than one computer using a range of IP addresses.
You must type network addresses in “slash” notation (also known as CIDR, or Classless Inter Domain
Routing, notation). Do not type a slash for a host IP address. For more information on how to enter IP
addresses in slash notation, refer to this FAQ:
http://watchguard.com/support/advancedfaqs/general_slash.asp.
You must log in to your LiveSecurity account to see this FAQ.
5 Type the destination IP address and the gateway in the related fields.
The gateway is the local interface IP address of the router. The gateway IP address must be in the Firebox X Edge
trusted, optional, or external network range.
6 Click Submit.
To remove a static route, click the IP address and click Remove.
Registering with the Dynamic DNS Service
You can register the external IP address of the Firebox® X Edge e-Series with the dynamic Domain Name
Server (DNS) service DynDNS.org. A dynamic DNS service makes sure that the IP address attached to
your domain name changes when your ISP gives your Edge a new IP address.
Vista de pagina 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 233 234

Comentarios a estos manuales

Sin comentarios