Watchguard Firebox X5-W Guía de usuario Pagina 56

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 234
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 55
Configuration and Management Basics
40 Firebox X Edge e-Series
9 Type the Client Name to give to your Firebox X Edge.
This is the name used to identify the Edge in the Management Server.
10 Type the Shared Key.
The shared key is used to encrypt the connection between the Management Server and the Firebox X Edge. This
shared key must be the same on the Edge and the Management Server. Get the shared key from your VPN
administrator.
11 Click Submit.
Enable remote management with WFS v7.3 or earlier
Follow these instructions to configure remote access from WatchGuard Firebox System v7.3 or earlier.
These versions of WatchGuard Firebox System use VPN Manager where the Firebox is the DVCP Server.
1 To connect to the System Status page, type https:// in the browser address bar, and the IP
address of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
2 From the navigation bar, select
Administration > WSM Access.
The WatchGuard System Manager Access page appears.
3 Select the Enable remote management check box.
4 From the Management Type drop-down list, select VPN Manager.
5 If you use VPN Manager 7.3, click the VPN Manager 7.3 check box.
6 Click the Enable VPN Manager Access check box to allow VPN Manager to connect to the Firebox
X Edge. Type and confirm the status and configuration passphrase for the Edge.
Note
If you do not type the same passphrase when you add the device to VPN Manager, you cannot connect
to the Firebox X Edge.
Vista de pagina 55
1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 233 234

Comentarios a estos manuales

Sin comentarios