Watchguard Firebox X5-W Guía de usuario Pagina 183

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 234
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 182
User Guide 167
Hardware Description
The Firebox® X Edge e-Series has a simple hardware architecture. All indicator lights are on the front
panel and all ports and connectors are on the rear panel of the device.
Front panel
The front panel of the Firebox X Edge e-Series has 18 indicator lights to show link status. The top indica-
tor light in each pair comes on when a link is made and flashes when traffic goes through the related
interface. The bottom indicator light in each pair comes on when the link speed is 100 Mbps. If the bot-
tom indicator light does not come on, the link speed is 10 Mbps.
WAN 1, 2
Each WAN indicator shows the physical connection to the external Ethernet interfaces. The light
is yellow when traffic goes through the related interface.
WAP
The WAP indicator shows that the Firebox X Edge e-Series is activated as a wireless access point.
The light is green when traffic goes through the wireless interface on a Firebox X Edge e-Series
Wireless model.
Fail/Over
The Fail/Over indicator shows a WAN failover. The light is green when there is a WAN failover
from WAN1 to WAN2. The light goes off when the external interface connection goes back to
WAN1.
Link
The link indicator shows a physical connection to a trusted Ethernet interface. The trusted
interfaces have the numbers 0 through 2. The light comes on when traffic goes through the
related interface.
100
When a trusted network interface operates at 100 Mbps, the related 100 indicator light comes
on. When it operates at 10 Mbps, the indicator light does not come on.
Status
The status indicator shows a management connection to the Firebox X Edge e-Series. The light
goes on when you use your browser to connect to the Firebox X Edge e-Series configuration
pages. The light goes off a short time after you close your browser.
Mode
The mode indicator shows the status of the external network connection. The light comes on
when the Ethernet cable is correctly connected to the WAN1 interface. The light is green if the
Vista de pagina 182
1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 233 234

Comentarios a estos manuales

Sin comentarios