Watchguard Firebox X5-W Guía de usuario descargar pdf (Pagina 116)

Managing Network Traffic

100 Firebox X Edge e-Series

7 To add a custom service to the NAT entry, click Add Service.

For more information, see the subsequent section.

Add or Edit a Custom Service for 1-to-1 NAT

1 To connect to the System Status page, type https:// in the browser address bar, and the IP address

of the Firebox X Edge trusted interface.

The default URL is: https://192.168.111.1

2 From the navigation bar, select Firewall > NAT.

The NAT (Network Address Translation) page appears.

3 Select the 1-to-1 NAT entry you want to edit, then click Edit.

The Custom Service page appears.

4 In the Service Name text box, type a name for the service.

5 Under Protocol Settings, select the protocol type.

You can select TCP port, UDP port, or Protocol.

6 Adjacent to the Protocol Settings drop-down list, type a TCP or UDP port range in the text boxes,

or a protocol number in the text box.

7 From the Incoming Filter drop-down list, select Allow to let incoming traffic reach the host, Deny

to prevent incoming traffic, or No Rule to use the default settings.

If you select No Rule, all incoming traffic is blocked by default.

8 To redirect the traffic coming to this IP address to a specific port, type a port number in the Port

Redirect text box.

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 233 234

Sin comentarios

Watchguard Firebox X5-W Guía de usuario Pagina 116