
Navigating the Firebox X Edge e-Series Configuration Pages
22 Firebox X Edge e-Series
Navigating the Configuration Pages
All configuration procedures for the Firebox® X Edge e-Series use the configuration pages. The System
Status page appears when you connect to the Edge.
In this User Guide, most procedures start with this step:
“To connect to the System Status page, type
https:// in the browser address bar, and the IP address
of the Firebox X Edge trusted interface. The default URL is: https://192.168.111.1.”
This opens your Firebox system configuration pages. You can change the IP address of the trusted net-
work from 192.168.111.1 to a different IP address if necessary. For more information, see “Configuring
the Trusted Network” on page 50.
For example:
1 Start your web browser.
2 Click File > Open, type https://192.168.111.1 in the Open text box and click OK.
You also can type https://192.168.111.1 directly into the address or location bar and press Enter.
3 When a security certificate notification appears, click Yes.
This warning will appear each time you connect to the Firebox X Edge using HTTPS.
4 Enter your user name and password to authenticate.
The System Status page appears.
Note
If necessary, you can connect to the web server on the Firebox X Edge using HTTP instead of HTTPS.
HTTP is less secure, because any information you send to the Firebox is unencrypted. We recommend
that you always use HTTPS to configure the Firebox X Edge.
Comentarios a estos manuales