Watchguard Firebox X5-W Guía de usuario Pagina 103

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 234
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 102
User Guide 87
Configuring Firewall Settings
Here are some examples of how you can use the optional network:
You can use the optional network for servers that the external network can get to. This helps to
protect the trusted network, because no traffic is allowed to the trusted network from the
optional network when the Firebox X Edge is in default configuration.
When computers are accessible from the external network, they are more vulnerable to attack. If
your public web or FTP server on the optional network is hacked or compromised, the attacker
cannot get to your trusted network.
You can use the optional network to secure a wireless network. Wireless networks are usually less
secure than wired networks. If you have a wireless access point (WAP), you can increase the
security of your trusted network by keeping the WAP on the optional network.
You can use the optional network to have a different network IP address range that is allowed to
communicate with the trusted network. See the section “Disabling Traffic Filters,” below.
Controlling traffic from the trusted to optional network
Do these steps to deny traffic that goes from the trusted network to the optional network:
1 To connect to the System Status page, type https:// in the browser address bar, and the IP
address of the Firebox X Edge trusted interface.
The default URL is: https://192.168.111.1
2 From the navigation bar, click Firewall > Optional.
The Filter Outgoing Traffic to Optional Network page appears.
3 To allow all traffic from the trusted network, select Allow for the Outgoing service from the Filter
drop-down list.
4 To deny all traffic from the trusted network, select Deny for the Outgoing service from the Filter
drop-down list.
5 To deny some traffic, but allow all other traffic from the trusted network to the optional network, set
the Outgoing service to Deny from the Filter drop-down list. Then, for each service that is
permitted, select Allow from the Filter drop-down list.
If you want to deny the traffic and create a log entry for each time the traffic is denied, select No Rule.
6 Click Submit.
Vista de pagina 102
1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 233 234

Comentarios a estos manuales

Sin comentarios