Watchguard Firebox X5-W Guía de usuario descargar pdf (Pagina 117)

User Guide 101

Managing Network Traffic

9 To add a host or network to the From list, select Host IP Address, Network IP Address, or Network

Range from the drop-down list. Type the IP address or range in the adjacent text box and click Add.

The entry is added to the From list. To remove an entry, select an IP address or range and click Remove.

10 To create an entry in the log for each incoming packet, select the Log Incoming Traffic check box.

11 From the Outgoing Filter drop-down list, select Allow to let outgoing traffic go from the host,

Deny to prevent outgoing traffic, or No Rule to use the default settings.

If you select No Rule, all outgoing traffic is blocked by default.

12 To add a host or network to the To list, select Host IP Address, Network IP Address, or Network

Range from the drop-down list. Type the IP address or range in the adjacent text box and click Add.

The entry is added to the To list. To remove an entry, select an IP address or range and click Remove.

13 To create an entry in the log for each outgoing packet, select the Log Outgoing Traffic check box.

14 Click Submit.

The custom service settings are saved.

Remove a 1-to-1 NAT entry

1 To connect to the System Status page, type https:// in the browser address bar, and the IP address

of the Firebox X Edge trusted interface.

The default URL is: https://192.168.111.1

2 From the navigation bar, select Firewall > NAT.

The NAT (Network Address Translation) page appears.

3 Select the 1-to-1 NAT entry you want to delete, then click Remove.

The entry is removed from the Secondary IP Addresses list.

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 233 234

Sin comentarios

Watchguard Firebox X5-W Guía de usuario Pagina 117