Watchguard V2 Especificaciones descargar pdf (Pagina 29)

Step 5: Connecting To The SecureNet Digital Monitoring Centre

Once the Main Control Unit is installed, your Watchguard Digital Alarm System is ready to

be connected to the SecureNet Digital Monitoring Centre. The SecureNet Digital Monitoring

Centre dramatically increases the protection provided by your Watchguard Digital acting,

as a link between you, your security system and guard, police, fire or medical emergency

services.

Once you have set up your notification rules and account details, when your alarm system

is triggered, the SecureNet Digital Monitoring Centre will immediately contact you via

phone, email or SMS and you will be informed of the alarm time, location and type. You will

also be able to send a guard to inspect your premises if at any time you are unable or feel

it is unsafe to do so yourself. Before you can connect to the SecureNet DIGITAL

MONITORING CENTRE your Main Control Unit must be connected to a phone line that is

capable of dialling 1900 and 1300 numbers. Once your phone line is connected, you

should follow the steps below to register with the SecureNet Digital Monitoring Centre.

*Note: occasionally your alarm panel will need to dial the SecureNet Digital Monitoring

Centre to send alarm and panel information such as the weekly test report. This means that

the connected phone line will occasionally be busy for approximately 30 seconds.

Step A- Register Your Alarm System

Please visit www.watchguardalarms.com.au and then click on the ‘Register’ button to

begin the 3-step on-line registration process. You will need the serial number from the sticker

located at the front of the main control unit. Important Note: If you cannot register via the

internet, simply call 1300 653 533 to complete a phone registration.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 55 56

Sin comentarios

Watchguard V2 Especificaciones Pagina 29