Watchguard SOHO Manual de usuario descargar pdf

Installation Procedures: Macintosh with Netscape 6 1

Installation Procedure

Macintosh with Netscape 6

Printer Friendly Version [ PDF | 244K ]

Before You Begin

Before proceeding with the installation of a SOHO 6 appliance, you must have the following:

• A computer with a 10/100BaseT Ethernet I/O card and a Web browser, such as Internet Explorer.

• A cable or DSL modem with a 10/100BaseT port or an ISDN router. This is unnecessary if you

connect to the Internet using a LAN connection.

• Two Ethernet network cables with RJ45 connectors. These must not be “crossover cables” (which are

usually red or orange). One cable is furnished with your SOHO 6. A second cable may have been

supplied with your modem. If not, you will need to purchase a second Ethernet, RJ45 cable.

• A functioning Internet connection. If your connection does not work, please contact your ISP

(Internet Service Provider).

• Call your ISP to find out which method they use to issue your network addressing–static addresses,

DHCP, or PPPoE. You need this information later in the installation process, see “Configure the

External Network of the SOHO 6”.

• The SOHO 6 6 serial number.

Review and record your current TCP/IP settings and your DHCP status

The most common method to distribute IP addresses is to use Dynamic Host Configuration Protocol

(DHCP). When you connect your computer to the network, a DHCP server at your ISP automatically

assigns it a network IP address. This eliminates the ISP from having to manually assign and manage IP

addresses.

Before you begin the installation process, connect to the Internet. You need to determine your current

TCP/IP settings and DHCP status.

1 Click

Apple menu => Control Panels => TCP/IP.

The TCP/IP (internetConfig) window appears.

2 Verify and configure your DHCP status:

- At the “Configure” drop list, if “Using DHCP Server” is selected, then your computer is

configured for DHCP. If “Manually” is selected, then your computer is configured for static

addressing. Record the DHCP status in the “TCP/IP Setting Chart” provided above.

1 2 3 4 5 6

Indice de contenidos

Pagina 1 - Installation Procedure

Installation Procedures: Macintosh with Netscape 6 1Installation ProcedureMacintosh with Netscape 6Printer Friendly Version [ PDF | 244K ]Before You B

Pagina 2 - Before You Begin

Installation Procedures: Macintosh with Netscape 6 2Before You Begin - For the initial installation of your SOHO, your computer must receive its IP ad

Pagina 3

Installation Procedures: Macintosh with Netscape 6 3Install the SOHO 6 6 appliance Install the SOHO 6 6 applianceEach of the Trusted Network ports (nu

Pagina 4 - The PPPoE Client

Installation Procedures: Macintosh with Netscape 6 4Configure the External Network of the SOHO 6The DHCP ClientOut of the box, the SOHO 6 is configure

Pagina 5 - Install additional computers

Installation Procedures: Macintosh with Netscape 6 5Troubleshooting the Connection2 Enter the PPPoE login name and password supplied by your ISP.3 Ena

Pagina 6

Installation Procedures: Macintosh with Netscape 6 6Register your SOHO 6 and Activate the LiveSecurity ServiceRegister your SOHO 6 and Activate the Li